Manualshelf

User's Manual

ManualsBrandsNAMCO Bandai Games ManualsHandheld Game SystemNAMCO Bandai Games Downhill Biker
31323334353637383940
Page 37
5-2 Fitting the Bike Assy
1. Remove the 4off socket head screws (M8x16), remove the shipping
bracket and rubber pad from each bike, and refit the 4off hex head screws
(M8x16).
2. Remove the 2off security screw (M5x12) and remove the roping bracket
and protective paper on the rear of each bike. Refit the 2off security
screws (M5x12)
3. Place the bikes close to the monitor cabinet and connect the connectors.
Push the ride assembly up to the monitor cabinet, taking care not to trap
any wires or connectors.