User's Manual

Page 49
6-3-3 I/O Test
1. Select “I/O TEST” on the menu screen to switches and lamps. The
following screen is displayed.
2. Use the Select Up/Down switch to choose the required item then press
the Enter button to enter the test.
3. Select “EXIT” and press the Enter button to return to the menu screen.
(a) Shows the condition of the DIP Switches on the PCB. In normal operation
all switches are OFF. (If a switch is ON, it will be displayed in red.)
(b) Shows the number of units linked. (1 ~ 4).
If no link data is being received LINK OFF will be displayed.
If unrecognisable data is being received LINK NG will be displayed.
(c) Checks function of I/O PCB.
(d) Instructions to Initialize game.
(see Section 7 page 56)
Note: Initialization cannot be started from this screen
(e) Selecting this item allows all switches and pedal sensor to be checked.
(See 6-3-3-3 page 51)
(f) Selecting this item allows the testing of the pedal brake and start lamps.
(See 6-3-3-4 page 52)
I/O TEST
DIP 4
12345678 [ON:RED] .............................................. (a)
LINK
ON 2 ............................................ (b)
I/O PCB CHECK ............................................ (c)
HOW TO [I/F INITIALIZE] ............................................ (d)
SWITCH TEST ............................................ (e)
PEDAL & LAMP TEST ............................................ (f)
EXIT
SELECT SW : CHOOSE ENTER SW : ENTER