User's Manual

Page 50
6-3-3-1 I/O PCB Check
1. Select ‘I/O PCB CHECK’ from the I/O Test Screen. The following
screen is displayed:-
I/O TEST
DIP 4
12345678 [ON:RED]
LINK ON 2
I/O PCB CHECK
Master TX 3536 NAMCO LTD.
DOWNHILL BIKERS ; Ver1.00 ; JPN
1/0 PCB CONNECT OK NAMCO LTD.
ASCA-4
EXIT
SELECT SW : CHOOSE ENTER SW : ENTER
6-3-3-2 How to [I/F Initialize]
1. Select ‘I/O PCB CHECK’ from the I/O Test Screen. The following
screen is displayed:-
Note:
This is an instruction screen only. Initialization cannot be performed
from this screen. (see Section 7 page 56 for initialization)
I/O TEST
DIP 4
12345678 [ON:RED]
LINK ON 2
HOW TO [I/F INITIALIZE]
I/F INITIALIZE:
HOLDING SERVICE SW
AND TURN ON TEST SW
EXIT
SELECT SW : CHOOSE ENTER SW : ENTER