User's Manual

Page 52
6-3-3-4 Pedal & Lamp Test
1. Select ‘I/O PCB CHECK’ from the I/O Test Screen. The following
screen is displayed:-
I/O TEST
DIP 4
12345678 [ON:RED]
LINK ON 2
PEDAL & LAMP TEST
PEDAL BRAKE
01 2 3 4
OFF MIN >>> >>> MAX
BUTTON LAMP
ON ......................................................... (b)
EXIT
SELECT SW : CHOOSE ENTER SW : ENTER
(a)
(a) PEDAL BRAKE (force feedback)
Press the ENTER button to apply the pedal brake force-feedback in
five levels (0-4)
(b) BUTTON LAMP
The Start Switch lamp will switch on and off each time the ENTER
button is pressed.