User's Manual

Page 58
8-2 Replacing the Monitor
The monitor is heavy. At least two people are required to remove the monitor.
1. Disconnect the bike assembly from the monitor cabinet first (see section
5-2 page 37), to allow a safe and sufficient space to work
2. Remove the 2off upper security screw (M5x12) and slacken the 2off lower
security screw (M5x12), and remove the monitor rear access panel.
3. Remove the pozi head screw (M4x10) and remove the Earth wire and
connectors from the monitor.
4. Remove 10off security screw (M5x16), 5ea side, and remove the side
vac-forms.