User's Manual

Page 63
8-5 Replacing the Pedals
1. Remove the pedals by using an allen key fitted to the inner end of the
pedal shaft, and turning the allen key, when pointing up, to the rear of the
bike. (i.e. the left hand pedal has a left hand thread.) When replacing the
pedals, ensure that the correct pedal is used. The pedals have L or R
stamped on them.
8-6 Replacing the Crank Arms
A two part tool is supplied to enable the fitting and removal of the crank arms.
Ensure that this tool is kept with the machine at all times.
1. Remove the push fit plastic end cap.
2. Screw end A of the special tool fully out.
3. Place end B of the special tool over the crank nut and using a spanner,
turn end B to remove the crank nut.