User's Manual

Page 65
8-7 Adjusting the Belt
1. Remove both left and right crank arms complete with pedals. (See section
8-6 page 35)
2. Remove 10off security screw (M5x16) and 4off security screw (M5x20),
and remove both side vac-forms.
8-8 Adjusting the Chain
1. Remove the pedals and crank arms. (see section 8-6 page 63)
2. Remove the side vac-forms. (see section 8-7 above)
3. Loosen 4off flanged socket head screws (M6x14) and 2off nuts (M8) of
the work load unit. (Do not remove the screws or nuts).
4. Adjust the position of the work load unit so that the upper right edge of
the tensioner matches the marking on the work load unit.