User's Manual

Page 66
8-9 Replacing the Chain
1. Remove the pedals and crank arms. (see section 8-6 page 63)
2. Remove the side vac-forms. (see section 8-7 page 65)
3. Disengage the chain by turning the chain wheel in the direction of arrow 2
while pulling the chain toward you (in the direction of arrow 1).
4. Engage the chain with the chain wheel of the work load unit and between
the pedal chain wheel and sensor sprocket. Turn the pedal chain wheel
clockwise until the chain is fully engaged.
5. Adjust the tension of the chain. (see Section 8-7 page 65)
6. Redit the side vac-forms and pedals.
5. Retighten the flanged socket head screws and nuts.
6. Refit the side vac-forms and pedals.