user manual

Page 41
4-5 Adjusting the Level Adjusters
1. When the game is in it’s final position, lower the six (6) Level adjusters, 4 on the
Monitor Cabinet and 2 on the Coin Tower Assy, with a spanner, so that all castors
are raised from the floor by approximately 5mm. Tighten the lock nuts with a
spanner to ensure that the Level Adjusters do not move.
Note: If the site of this game has a smooth or polished floor, it is recommended that
rubber pads are fitted under the Level Adjusters to prevent the game sliding on
the floor when in use.
Level adjuster
Castor
Approx. 5mm
Lock Nut