user manual

Page 58
5-2-4 Monitor Test
1. Select “MONITOR TEST” on the menu screen to make adjustments to the
monitor. The following screen is displayed.
2. Use the Select Up/Down switch to choose the required item then press the Enter
button.
3. Press the Enter button to return to Monitor Test Screen.
4. Select “EXIT” and press the Enter button to return to the menu screen.
(a) Displays graduated colour bars for adjusting brightness and contrast.
(b) Displays a cross-hatch pattern for adjusting monitor geometry
(c) Displays screen frame for adjusting picture size and position.
(d) Displays a full white screen for adjusting monitor colour.
MONITOR TEST
GRADATION PATTERN
CROSSHATCH PATTERN
VIEW ANGLE ADJUST
FULL WHITE
EXIT
SELECT SW:CHOOSE ENTER SW:ENTER
(a)
(b)
(c)
(d)