Phau Ntawv Qhia

Table Of Contents
W415-2920 / B / 04.26.22
EN
4
table of contents
1.0 general information 5
1.1 rates and effi ciencies 5
1.2 installation overview 6
1.3 rating plate information 8
1.4 mobile home installation 8
1.5 hardware list 9
1.6 front frame installation 9
1.7 dimensions 10
1.8 optional heat management
system 11
2.0 venting requirements 12
2.1 typical venting installation 14
2.1.1 corner termination 15
2.2 minimum air terminal location
clearances 16
2.3 top exit - all terminations 17
2.4 rear exit - horizontal termination 18
2.5 rear exit - vertical termination 19
2.6 rear exit 20
2.7 rear exit shield (for rear vent only)
20
2.8 top exit 21
3.0 rough framing 23
3.1 minimum framing dimensions 23
3.2 minimum clearance to
combustible enclosures 24
4.0 venting installation 30
4.1 horizontal installation 30
4.2 vertical installation 31
4.3 using either fl exible vent
components 32
4.3.1 horizontal air terminal installation
32
4.3.2 vertical air terminal installation 33
4.3.3 appliance vent connection 33
4.3.4 restricting vertical vents 34
5.0 electrical information 35
5.1 hard wiring connection 35
5.2 receptacle wiring diagram 35
5.3 electronic wiring diagram 35
5.4 battery back-up installation 36
5.5 initializing the transmitter for the
rst time 37
5.6 wiring diagram 38
5.7 light & blower assembly wiring
diagrams 39
6.0 gas installation 40
7.0 nailing tab installation 40
8.0 operation 41
8.1 pilot-on-demand 42
9.0 finish framing 43
9.1 fl ush 43
9.2 recess 44
10.0 finishing 45
10.1 safety barrier & glass door
installation / removal 45
10.2 hood installation 46
10.3 nishing with non-combustibles 47
10.4 installing non-combustible board
48
10.5 minimum combustible mantel
clearances 49
10.6 clearances around appliance (TV
and valuable objects) 50
10.7 air fl ow cover installation 51
10.8 log placement 52
10.9 glowing embers 54
10.10 charcoal embers 54
10.11 glass media placement 54
11.0 adjustments 55
11.1 venturi adjustment 55
11.2 pilot burner adjustment 55
11.3 ame characteristics 56
12.0 maintenance 57
12.1 care of glass 57
12.2 annual maintenance 58
12.3 glass / door replacement 58
12.4 night light replacement 58
12.5 blower replacement 59
13.0 replacement parts 60
13.1 overview 61
13.2 valve train assembly 62
14.0 troubleshooting 63
15.0 warranty 66
16.0 service history 67
The information throughout this manual is believed to be correct at the time of printing. Wolf Steel Ltd. reserves
the right to change or modify any information within this manual at any time without notice. Changes, other than
editorial are denoted by a vertical line in the margin.
note: