Instructions / Assembly

W415- 2166 / A / 06.29.16
18
EN
6.2 CRYSTAL EMBER PLACEMENT
1. Unscrew the two screws at the bottom of the front plate.
2. Unhook and lift off the frame of the inner surface and
place carefully on a safe work surface.
3. Unscrew the two screws on the ember tray with a screw-
driver.
4. Remove the logset and put the crystals in.
5. Re-install the frame of the inner surface.
FRONT PLATE
UNSCREW LOGSET
Front View of Appliance
PLACE CRYSTALS
2 Screws
2 Screws
UNHOOK INNER FRAME
PLACE CRYSTALS
!
WARNING
TURN OFF THE APPLIANCE COMPLETELY AND LET COOL BEFORE SERVICING. ONLY A QUALIFIED
SERVICE PERSON SHOULD SERVICE AND REPAIR THIS ELECTRIC APPLIANCE.