Specification

3/14/17
Acrylic
N/A
1.89 in x 120.3 yd (48 mm x 110 m)
! ! Suitable for metal to metal connections in HVAC
and refrigeration applications
!
!
!
Can contribute toward satisfying EA Credit 1
(Optimize Energy Performance) under LEED®
!
!
!
!
!
!
181B-FX printed for easy inspector identification
!
25 Forge Parkway Franklin, MA 02038
1-800-343-7875 Fax [phone]
www.nashuatape.com
Installation Temperature
-10 to 180 °F
-17 to 82 °C
Operating Temperature
-40 to 212 °F
-40 to 100 °C
Tough, contractor-grade closure system intended
Backing:
Adhesive:
Liner:
Specifications:
UL 181B-FX Listed
Colors:
Metallic
Available Size:
Applications
Printed Biaxially-Oriented Polypropylene Film
for use on UL Listed flexible, non-metallic ducts
Seals bubble and reflective insulation materials
Features
Benefits
UL 181B-FX Listed
Meets code requirements for sealing flexible air
ducts and connections
Biaxially-Oriented Polypropylene Film
Tough and durable
Hand tearable for ease of use
Typical Test Values
Standard UOM
Metric UOM
Test Method
Aggressive, high tack bond
Low-odor adhesive
Low VOC Content
Can contribute toward satisfying EQ Credit 4.1
(Low Emitting Materials) under LEED®
ASTM D-1000
Total Thickness
3.1 mils
79 μm
ASTM D-1000
Recommended Storage Conditions: 32 - 90 °F at 50% RH ± 2%
Standard Shelf Life (at 25 °C): 24 months from date of manufacture
The information presented herein was prepared at BERRY PLASTICS CORPORATION (25 Forge Parkway Franklin, MA 02038) by qualified technical personnel. To Berry Plastics' knowledge it is true
and accurate. However, the information and recommendations are furnished for these products with the understanding that the purchaser or user, as the case may be, will independently determine that
the product is suitable for the intended use, and that such use complies with all applicable federal, state and local laws and regulations. The data are typical values submitted only for the user's
information and consideration, and do not constitute a warranty of any kind (including but not limited to a warranty of merchantability or of fitness for a particular purpose), or a representation for which
BERRY PLASTICS assumes any legal responsibility.
Mold and moisture-resistant
Acrylic Adhesive
VOC Content
< 1 g/L
Adhesion to Steel
45 oz/in
4.92 N/cm
PSTC-101
Tensile Strength
34 lb/in
59.54 N/cm
FLEXFIX
®
555
HVAC