User's Manual

Appendix A Specifications for AT-MIO-16E-1, AT-MIO-16E-2 and AT-MIO-64E-3
 National Instruments Corporation A-7 AT-MIO/AI E Series User Manual
Gain error
(relative to external reference)........... +0% to +0.5% of output max, not
adjustable
Voltage Output
Ranges .............................................. ±10 V, 0 to 10 V, ±EXTREF,
0 to EXTREF
(software selectable)
Output coupling................................. DC
Output impedance ............................. 0.1 Ω max
Current drive..................................... ±5 mA max
Protection.......................................... Short-circuit to ground
Power-on state................................... 0 V
External reference input
Range..........................................±11 V
Overvoltage protection................±25 V powered on, ±15 V
powered off
Input impedance..........................10 kΩ
Bandwidth (-3 dB) ......................1 MHz
Dynamic Characteristics
Settling time for full-scale step.......... 3 µs to ±0.5 LSB accuracy
Slew rate ........................................... 20 V/µs
Noise................................................. 200 µVrms, DC to 1 MHz
Glitch energy (at midscale transition)
Magnitude
Reglitching disabled.............±200 mV
Reglitching enabled..............±30 mV
Duration......................................1.5 µs
Stability
Offset temperature coefficient........... ±50 µV/°C
Gain temperature coefficient
Internal reference........................±25 ppm/°C
External reference.......................±25 ppm/°C