www.nationalpublicseating.
Begin by identifying all the parts and hardware. Assembling column to base: Step 1: Remove base (Part A) from carton and place on clean flat surface. Step 2: Insert bottom of column (Part B) firmly into center of base with column locking mechanism facing point at center of base. (See ILL. 1.). Step 3: Carefully turn unit on its side to enable securing base to column.
Assembling tabletop to column: (Note: Two people are needed for this). Step 1: After column has been installed onto base, lift unit and place in standing position. Step 2: Carefully remove tabletop from carton and have one person place it vertically onto column (See ILL 3A.) by placing latch into notch on top of column as illustrated (ILL 3B.) and hold in place while second person completes attachment.
