User Manual

▪ You can load a Sample into its own Zone in the Zone page of the Sample Editor: A new
Zone will be created for that Sample. See section ↑16.5.7, Adding Samples to the Sample
Map for more information.
Drag and drop of Groups and Sounds is possible only in Arrange view.
Loading Multiple Files at Once via Drag and Drop
Once you have selected multiple files from the Result list (see description above), you can drag
and drop them to the relevant locations in MASCHINE. By doing this, please keep in mind the
following:
▪ When dragging several Groups onto the Group List, you have following options:
◦ If you drop the Groups between two existing Groups (where the insertion line appears),
the dropped Groups will be inserted between these two Groups.
◦ If you drop the Groups onto an existing Group, the dropped Groups will replace that
Group and the following ones.
◦ If you drop the Groups onto the “+” at the end of the Group List, the Groups will be
appended to the existing Groups in the Group List.
▪ When dragging several Sounds, you have following options:
◦ If you drop the Sounds onto an existing Group, the Sounds will be loaded in the empty
Sound slots of that Group — if there are not enough empty Sound slots, the Sounds
will be loaded in the first Sound slots of the Group, replacing the Sounds previously
loaded in these slots.
◦ If you drop the Sounds onto the “+” at the end of the Group List, the Sounds will be
loaded in a new Group appended to the existing Groups.
◦ If you drop the Sounds onto the Sound List, the Sounds will be loaded in adjacent
Sound slots, starting from the slot onto which you dropped them.
▪ When dragging several Instrument presets, you have the same options as when dragging sev-
eral Sounds (see above). Each Instrument preset will be loaded into in its own Sound, and
the Sound will take the name of the preset.
▪ When dragging several Effect presets, you have following options:
Browser
Searching and Loading Files from the Library
MASCHINE - Manual - 139