User Manual

6.2.2 Page 2: Pitch / Envelope
Sampler parameters – page 2 of 6: PITCH / GATE and AMPLITUDE ENVELOPE on the controller.
Sampler parameters – page 2 of 6: PITCH / GATE and AMPLITUDE ENVELOPE in the software.
Parameter Description
PITCH / GATE
Tune Defines the basic pitch of your Sample: turn the knob to the right for
a higher pitch and to the left for a lower pitch.
Start Determines the start point of the Sample. This parameter can also be
modulated by the Velocity control, see ↑6.2.5, Page 5: LFO.
Reverse If Reverse is activated, the Sample will be played backwards.
Type Selects from three different types of amplitude envelopes. See below
for more information.
Working with Plug-ins
The Sampler Plug-in
MASCHINE - Manual - 303