User Manual

The Transient Master in the Control area.
Parameter Description
DEPTH Section
Input Gain Adjusts the level of the input signal. This allows you to offset the
overall level once you have set the desired effect, in order to
counterbalance the gain or loss of level that might occur.
Attack Sharpens/softens the attack phases in your signal. With the knob at
the middle position, the attack phases are not altered. From this
position, turning the Attack knob to the left softens the attack
phases, while turning it to the right sharpens them.
Sustain Prolongs/shortens the sustain phases in your signal. With the knob
at the middle position, the sustain phases are not altered. From this
position, turning the Sustain knob to the left shortens the sustain
phases, while turning it to the right prolongs them.
Limit Activates a hard limiter at the output, preventing the output signal
from clipping. This can be useful when the Attack knob is set to a
high value as this may produce amplified attack phases which
become too loud.
Effect Reference
Dynamics
MASCHINE - Manual - 669