User's Manual

Mixer.

(1) Mixer channel A and B: The Mixer channels A and B receive the individual audio signals from

the Decks A and B. Each Mixer channel contains controls to adjust the audio signal's frequency

content and to adjust the outgoing volume before the audio signal is send to the MASTER out-

put. For more information, refer to Mixer Channel.

(2) QNT: Allows you to enable or disable Quantize mode and Snap mode. More Information, refer

to Snap Mode and Quantize Mode.

(3) MASTER knob: Adjusts the Master volume level.

(4) MIC button: Inserts the microphone channel signal to the Master signal.

(5) SAMPLE knob: Adjusts the volume for the combined channel of Remix Deck C or D.

(6) CUE MIX control: Adjusts the signal mix between Master output signal and the CUE channel

signal in the headphones.

(7) CUE VOL control: Adjusts the volume for the CUE channel.

(8) Mixer FX SELECT buttons: Select the individual Mixer FX to be controlled with the Mixer FX

Amount knob in the Mixer channel.

TRAKTOR KONTROL S2 Overview