User Manual

Slicer Mode
The Slicer mode extends the Freeze mode's functionality. A press on the LOOP button while in
Freeze mode the playback behavior of the pads changes: Instead of playing from the slice start
to the end of the entire track, pressing and holding a pad in Slicer mode will play back just the
corresponding slice in a loop. A further press on the Loop encoder exits Freeze Slicer and play-
back continuous as normal.
In Slicer Mode, the pads turn green and while playing back the selected loop, pads flash
bright green while the assigned slice is played back. This is also reflected on the Deck's
display.
4.2.3.4 REMIX Button
When on a Track Deck or Stem Deck the REMIX button enables Remix mode to get direct ac-
cess to the current Remix Set page of the corresponding Remix Deck. The pads reflect the col-
ors of the underlying Remix Cells.
REMIX Button
The Remix mode can only be enabled when the underlying Deck is configured as Remix
Deck. Otherwise the REMIX button remains unlit.
On a Remix Deck, the REMIX mode is the default and allows you to capture portions of a track
to the Remix Cells by pressing a pad. Furthermore, the REMIX button can be used to capture
loops.
If the Deck you set as capture source is empty, S8's display shows Error while copying
in the Deck header.
For more detailed information on capturing samples, refer to section ↑4.2.6, CAPTURE Button.
Hardware Reference
The Deck
TRAKTOR KONTROL S8 - Manual - 190