User Manual

The following table gives a detailed overview of the parameters controlled by FX buttons and
FX knobs and it provides links referring to sections with further information.
Name Function in Single Mode Function in Group mode
FX Button 1 Activate/deactivate the entire FX
Unit.
-
FX Button 2 Reset all FX parameters to their
default value.
Activate/deactivate FX slot 1.
FX Button 3 Depends on the selected effect. Activate/deactivate FX slot 2.
FX Button 4 Depends on the selected effect. Activate/deactivate FX slot 3.
FX Knob 1 Adjust the ratio between the
unprocessed (dry) signal and
processed (wet) signal for the
entire FX Unit.
Adjust the ratio between the
unprocessed (dry) signal and
processed (wet) signal for the
entire FX Unit.
FX Knob 2 Controls FX parameter 1. Control the 1st effect in the FX
Unit.
FX Knob 3 Controls FX parameter 2. Control the 2nd effect in the FX
Unit.
FX Knob 4 Controls FX parameter 3. Control the 3rd effect in the FX
Unit.
FX Unit 2 has the same layout as FX Unit 1, apart from the FX SECTION button being
located in the top-right corner of the device.
4.3.1 FX SELECT Button
Pressing the FX SELECT button opens the FX Settings in the display. FX1 is configured on the
left display, FX 2 on the right one.
Hardware Reference
The FX Unit
TRAKTOR KONTROL S8 - Manual - 211