User Manual

(4) Display Button 4: Zooms out of the waveform. Secondary function: When in Full Track view
and holding SHIFT and pressing Display button 4 will show Stem view.
Remix Deck View
(1) Display Button 1: Opens the BPM pop-up.
(2) Display Button 2: Opens the QUANTIZE pop-up.
(3) Display Button 3: Scrolls up in the Sample Grid in steps of two.
(4) Display Button 4: Scrolls down in the Sample Grid in steps of two.
Please note that you can leave any pop-up by pressing the same button again or, alternatively,
the View button.
4.7.4.5 Display
TRAKTOR's default layout is 2 Track + 2 Remix Decks (Scratch). This means that S8's two up-
per Decks (A and B) are Track Decks, and the lower Decks (C and D) Remix Decks.
▪ The left display provides feedback about Decks A and C.
▪ The right display provides feedback about Decks B and D.
Every active TRAKTOR Deck is a Track Deck, Stem Deck, Remix Deck or Live Input Deck. If a
mixer channel is set to Thru mode on S8, the corresponding TRAKTOR Deck is set to Thru
mode, as well. Here's an overview of the information S8's displays provide for each of these:
TRAKTOR's default layout is 2 Track + 2 Remix Decks (Scratch). This means that S8's two up-
per Decks (A and B) are Track Decks, and the lower Decks (C and D) Remix Decks.
▪ The left display provides feedback about Decks A and C.
▪ The right display provides feedback about Decks B and D.
Every active TRAKTOR Deck is a Track Deck, Stem Deck, Remix Deck or Live Input Deck.
Here's an overview of the information S8's displays provide for each of these:
Hardware Reference
The Deck
TRAKTOR KONTROL S8 - Manual - 250