User Manual

If you set up TRAKTOR with 4 FX Units, the Performance knobs and buttons in Deck A
control FX Unit 3, those in Deck B control FX Unit 4. By default, they have no function
for Track Decks.
Performance Mode FX SEND
When FX SEND is selected, the knobs control the amount of signal being sent to the assigned
FX Unit(s), per Slot. The FX SEND amount is displayed right above the corresponding Perform-
ance knob.
In case you increase FX SEND and still don't hear any effect, please make sure the Re-
mix Deck is actually assigned to an FX Unit in the corresponding Mixer channel.
For information on how to use Performance Controls for operating FX Units (3 and 4),
refer to section ↑4.3.3, Additional FX Unit 3 and 4.
Performance Mode PITCH
When PITCH is selected, the Performance knobs transpose the pitch of the playing sample. In
other words: pitch correction is applied per Remix Cell. The amount of pitch change is dis-
played above the corresponding knob.
4.7.6 Slot Volume Faders
S8 offers a separate volume fader per Remix Slot or Stem Part. This allows you to mix signals
from up to four Remix Slots within a single Remix Deck, or to mix signals from up to four Stem
Parts within a single Stem Deck before it runs through the channel fader and the Crossfader.
Hardware Reference
The Deck
TRAKTOR KONTROL S8 - Manual - 255