User Manual

(1) The Scope offers a circular representation of the incoming Timecode signal. If the calibra-
tion is successful, there is a blue outer circle and an orange diagonal line.
(2) The quality meter is on the right side. After a successful calibration, this is completely or-
ange.
(3) The stereo input level meter is on the bottom right. After a successful calibration, these two
channels are about halfway up.
(4) The status information at the bottom center.
The CALIBRATE button resets Timecode calibration. This is done automatically when you start
TRAKTOR.
Successful calibration using a Control MK2 CD
In a mixed setup with one turntable and one CD player, simply connect them as ex-
plained above. Remember to ensure that the LINE/PHONO switches are set accordingly,
and mixer channels' TRAKTOR buttons are bright orange—to indicate they are set to
TRAKTOR mode.
If you have followed the information in this chapter and are still having difficulty getting
the timecode vinyl or CD to successfully calibrate your decks, you will find detailed in-
formation on TRAKTOR SCRATCH and helpful troubleshooting information contained in
the TRAKTOR 2 Manual.
Common Setups
Integrating External Sources as TIMECODE Controls
TRAKTOR KONTROL S8 - Manual - 272