User Manual

Pads illuminated in LOOP mode.
Prerequisites
We assume here that the S8 is in the following state:
▪ The track “Techno 1” is loaded on Deck A and is not playing.
▪ The Crossfader is all the way to the left.
▪ The channel fader A is raised to the top.
▪ The MAIN knob has an adequate level.
3.3.1 Looping with Pre-defined Sizes
In LOOP mode, with the first row of pads you can engage loops with pre-defined values. By
default, these are (from left to right) 1/8, 1/4, 1/2 or 1 beat.
To engage a loop:
1. Press the Deck's PLAY button to start playback.
Using Your S8—Getting Advanced
Playing with Loops in LOOP Mode
TRAKTOR KONTROL S8 - Manual - 96