Manual

Sampler plug-in.
(1) Waveform display: Shows the waveform of the Sample.
(2) Start: Determines the Start point of the sample. When Loop is active, the Loop Point
determines the start of the loop.
(3) PITCH: Denes the pitch of your sample and adjusts the pitch within three octaves up or down.
As this is a traditional sampler.
(4) ENVELOPE: Selects one of three envelope types (One-shot, AHD and ADSR). For more
information, refer to Envelopes.
(5) Loop Point: Sets the point at which the loop will start playing. The Loop Point can be set
independently of the Start Point.
(6) LOOP: When the ON button is enabled, the sample will loop at a length determined by the Loop
Point and End Point.
(7) X FADE: Determines the type of fade between the loop points.
(8) End Point: Sets the End point of the sample. When Loop is active, the End Point determines the
length of the loop.
(9) Timeline: Shows the time scale in seconds.
6.8.1. Envelopes
An envelope allows you to modify the shape and timing of your sample, so you can create more
expressive and dynamic sounds. There are three Envelope types available in the Sampler plug-in;
One Shot, AHD and ADSR. Each Envelope will affect the playback and behavior of the sample.
One-shot
One-shot operates like a typical vintage drum machine; the sample is played in its entirety from
beginning to end, with no envelope. When this type is selected, no parameters are displayed.
The One-shot Envelope.
SOFT W ARE OVER VIEW 36