User Manual

The Aux page of the Output properties (here for a Group) in the software.
Please refer to section ↑3.3.5, Navigating Channel Properties, Plug-ins, and Parameter Pages in the
Control Area to know how to access the Aux page of the Output properties in the software and from
your controller.
Controls Description
AUX 1 / AUX 2 Section
Dest. Selects where you want to send the Aux 1 or Aux 2 output of your
channel. Available options are the same as for the Dest. selector of
the Audio page (see ↑12.1.2, Configuring the Main Output of
Sounds and Groups), except that for Aux 1 and Aux 2 the default
destination is None — in other terms there are no auxiliary sends
defined by default.
Level Adjusts the level of the signal sent to the Aux 1 or Aux 2 output.
Order If Order is set to Pre, the channel will be fed into Aux 1 or Aux 2
before the Level and Pan settings of the MAIN section on the Audio
page are applied. If Order is set to Post (default setting), the Level
and Pan settings of the main output also affect the signals sent to
the auxiliary outputs.
If MASCHINE is running as a plug-in, the external stereo outputs Ext. 1–16 available in the Dest.
selectors of the AUX 1 and AUX 2 section will correspond to virtual outputs in your host. This allows
you to send auxiliary outputs of individual Sounds or Groups from MASCHINE to their own mixer
channels within your DAW, for example.
Setting Up the Auxiliary Outputs of Sounds and Groups in Mix View
You can also easily set up auxiliary outputs for your Sounds and Groups in MASCHINE’s Mixer:
Audio Routing, Remote Control, and Macro Controls
Audio Routing in MASCHINE
MASCHINE MIKRO - Manual - 499