User Manual

Parameter Description
MAIN Section
Frequency This defines the center frequency of the Flanger.
Feedback Adjusts the amount of output signal fed back into the input.
Invert Inverts the Flanger.
MOD Section
Amount This defines how much the Flanger gets modulated by the
modulation source.
Source Here you can select the modulation source of the Flanger: available
options are LFO, LFO Sync, and Envelope. Depending on your
selection, the parameter to the right will change.
Speed (LFO) Defines the speed of the LFO in a range from 0.03 Hz up to 8 Hz.
Speed (LFO Sync) Defines the speed of the LFO in note values from 16/1 (one cycle
every 16 bars) up to 1/16 note.
Shape (Envelope) Change the shape of the envelope here.
Stereo This parameter widens the stereo field of the effect.
OUTPUT Section
Mix Mix lets you adjust the amount of the effect in relation to the dry
original audio signal.
15.3.3 FM
FM modulates the frequency of the audio signal based on FM synthesis. High frequency set-
tings are useful for adding a subtle “gritty” texture to the input signal.
Effect Reference
Modulation Effects
MASCHINE MIKRO - Manual - 617