User Manual

Selecting Sections and Section Banks on the Controller
Selecting a Section Bank
To select a Section located in another Section bank:
1. Press SHIFT + SCENE (Section) to access the Song view.
2. Press the Right Arrow button to select Bank.
3. Turn the Encoder to select the Bank you want to add to the Section.
→ The desired Bank is selected.
If the last Section bank is selected and not empty, pressing Button 8 will create a new, empty Sec-
tion bank, see section ↑16.3.12, Creating and Deleting Section Banks for more information.
Selecting a Section
To select a Section in the current Section bank:
1. Press SHIFT + SCENE (Section) to access the Song view.
2. Press the dim lit pad corresponding to the Section you want to select.
→ The Section is selected.
Upon your selection, the following happens:
▪ The Pattern Editor displays the Pattern corresponding to the focused Group in this Section.
If there is no Pattern for the focused Group in the Section you have just selected, the Pat-
tern Editor is empty.
▪ If you have selected the Section by pressing a pad, or if you have selected a Section out-
side the current Loop Range:
◦ The Loop Range is set to the selected Section, see section Selecting a Loop Range.
◦ If playback is off the playhead immediately jumps to the beginning of the selected
Section. If playback is on the playhead jumps according to the Perform Grid settings,
see section Jumping to Other Scenes.
Working with the Arranger
Using Song View
MASCHINE MIKRO - Manual - 703