User Manual

Selecting Multiple Zones in the List
You can select several Zones in the list at once using the common methods of your operating
system. The basic rules for multiple selection are the following:
▪ The focused Zone is automatically selected. It is highlighted in the color of the Sound and
its waveform and parameters are displayed in the Slice page’s Sample view and Zone set-
tings as well as on the Edit and Slice pages.
▪ The other selected Zones are highlighted in white. Their settings are not displayed any-
where, however they will be affected by your actions in the Zone List and in the Map view
(see section ↑17.5.4, Selecting and Editing Zones in the Map View for more on this).
Mouse/Keyboard Action Command
Multiple Selection
Hold [Ctrl] ([Cmd] on macOS) and
click several entries in the list
Selects all clicked Zones. Click a selected Zone to
deselect it (i.e. remove it from the selection).
Hold [Shift] and click two entries Selects both Zones and all Zones in-between.
Press [Ctrl]+[A] ([Cmd]+[A] on
macOS)
Selects/deselects all Zones in the list. When
deselecting, only the focused Zone remains selected.
Deleting Zones from the List
To remove one or more Zone(s) from the Zone List:
1. Select the Zone(s) you want to remove.
2. Press [Del] or [Backspace] on your computer keyboard.
→ The selected Zones are removed from the Zone List and from the Sample Map, and the
corresponding Samples are not used in the Sound anymore.
After you have selected the Zone(s) you want to remove, you can also use the context menu:
1. Select the Zone(s) you want to remove.
Sampling and Sample Mapping
Mapping Samples to Zones
MASCHINE MIKRO - Manual - 763