User Manual

Available Actions in the Map
You can select and edit Zones with your mouse and your keyboard in the Map. Following ac-
tions are available:
Mouse/Keyboard Action Command
Selection Commands
Click a Zone Puts this Zone under focus. The focused Zone is
highlighted. You can edit the focused Zone and the
playback settings of its Sample via the Zone settings
at the bottom of the Zone page, as well as process the
Sample’s audio material on the Edit page and/or slice
the Sample on the Slice page.
Hold [Ctrl] ([Cmd] on macOS) and
click several Zones
Selects all clicked Zones. Click a selected Zone to
deselect it (i.e. remove it from the selection).
Hold [Shift] and click two Zones Selects both Zones and all Zones in-between.
Click and drag a selection frame in
the Sample Map
Selects all Zones within or overlapping the frame.
Press [Ctrl]+[A] ([Cmd]+[A] on
macOS)
Selects/deselects all Zones. When deselecting, only
the focused Zone remains selected.
Edit Commands
Drag the left/right border of a Zone Adjusts the key range for the selected Zones.
Drag the higher/lower border of a
Zone
Adjusts the velocity range for the selected Zones.
Drag a corner of a Zone Simultaneously adjusts the lowest/highest note and
the lowest/highest velocity of the selected Zone(s) —
depending on the corner.
Click inside a Zone and drag Moves the selected Zone(s) across the Sample Map.
Note that the Root Key of each Zone is moved
accordingly.
Sampling and Sample Mapping
Mapping Samples to Zones
MASCHINE MIKRO - Manual - 767