User Manual

Humanize Mode Parameters
Element Description
Apply Applies the current settings to the selected Sound.
VELOCITY RANGE
Velocity Lo Adjust notes with a velocity no lower than the set value.
Velocity Hi Adjust notes with a velocity no higher than the set value.
TIME SHIFT
Step Set the amount of time shift per step. The value is applied to all
notes and will move them randomly in both plus and minus values
according to the overall percentage set here.
Step can be changed from +/- 0-50% in 5% increments. Press
SHIFT to change in finer increments of 1%.
7.4.7 Clearing Groups and Sounds
You can clear Groups and Sounds from your Project using MASCHINE JAM.
Clearing Groups
When a Group is cleared its Patterns are also removed from the Project.
On your controller, do the following to clear a Group:
1. Press and hold CLEAR.
2. Press the Group (A–H) button you want to clear. If your Project contains more than eight
Groups, use the D-pad Left or Right buttons to access other Group banks.
→ The Group, all its Sounds, and Patterns are removed.
Recording and Editing Patterns
Editing a Pattern
MASCHINE JAM - Manual - 120