User Manual

10.2.2 Using a Performance Effect
After selecting a Performance FX you can start to interact with it. This is where the fun really
begins!
To adjust a Performance FX:
1. Press PLAY to start playback of your Song.
2. Press the Group button (A–H) to select the Group where you applied the Performance FX.
3. Put your finger on the Smart Strip and slide it upwards to increase the effect, or slide it
downwards to decrease the effect.
→ The effect can be heard as you slide your finger up and down the Smart Strip. Take your
finger off the Smart Strip to release the effect.
Adjusting the Performance FX Parameters
Each Performance FX has a set of dedicated parameters that can be adjusted using the Smart
Strips. These parameters can also be viewed in the Control Area of the MASCHINE software.
To adjust the individual parameters of the selected Performance FX:
► Press the CONTROL button.
→ The Smart Strips can now be used to adjust the parameters of the Performance FX. Use
the Page buttons to switch between parameter pages.
For a full description of Performance FX parameters, see the MASCHINE Software Manual,
available from the Help menu.
10.2.3 Automating a Performance Effect
After selecting a Performance FX and applying it to a Group, if you find something you like
while playing with it, you can automate it! Automation will replicate any movement you make
with your finger on the Smart Strip, leaving your hands free to perform other tasks.
To automate a Performance FX:
1. Press PLAY to start playback of your song.
Mixing Your Song
Using Performance Effects
MASCHINE JAM - Manual - 157