User Manual

5. Press the Encoder to confirm the new value.
Adding Swing to a Group
To add Swing to a Group channel:
1. Press and hold the SWING button.
2. To change the Swing of a Group, select a Group button A-H. If your Project contains more
than eight Groups, use the D-pad Left and Right buttons to access other Group banks.
3. Turn the Encoder to select GROUP.
4. Push the Encoder and then turn it to select the Group Swing value. Hold SHIFT while you
turn the Encoder to adjust the value in finer increments.
5. Press the Encoder to confirm the new value.
→ The Swing value is updated. Alternatively, you can use the Smart Strips to adjust Swing
for each Group.
Adding Swing to a Sound
To add Swing to a Sound channel:
1. Press and hold the SWING button, then select a Sound 1-16.
2. Turn the Encoder to select SOUND.
3. Push the Encoder and then turn it to select the Sound swing value.
4. Press and turn the Encoder to adjust the value. Hold SHIFT while you turn the Encoder to
adjust the value in finer increments.
5. Press the Encoder to confirm the new value.
→ The Swing value is updated. Alternatively, you can use the Smart Strips to adjust Swing
for each Sound.
7.2.5 Applying Choke
The Choke All Notes feature allows you to kill any note or event currently playing in your
Project. This affects the audio coming from all Plug-ins.
Recording and Editing Patterns
Playing and Programming Beats
MASCHINE JAM - Manual - 88