User Manual

4.2 Setting up Your System for External Mixer Mode
This section will guide you through the set up of your TA2 for using it in External Mixer Mode
with your computer. If you want to set up your TA2 for using in Internal Mixer Mode, proceed
with section ↑4.1, Setting up Your System for Internal Mixer Mode.
4.2.1 Connecting TRAKTOR AUDIO 2 to Your Computer
To connect the TRAKTOR AUDIO 2 to your computer:
1. Connect the Mini USB connector of the supplied Mini USB cable to the Mini USB socket
on the rear panel of your TRAKTOR AUDIO 2.
2. Connect the “computer end” of the Mini USB cable to an available USB port on your
computer.
Windows Users Only: Completing the Device Driver Installation
Upon detection of the new hardware, Windows completes the device driver installation:
• A message reading Installing device driver software will be displayed.
Using TRAKTOR AUDIO 2 with Your Computer
Setting up Your System for External Mixer Mode
TRAKTOR AUDIO 2 - Manual - 26