User Manual

6 Using TRAKTOR AUDIO 2 as Your Computer's Default
Audio Output Device
In order for the TRAKTOR AUDIO 2 to operate as your computer's default audio output device,
you will need to select it within the system's audio preferences. In the following sections, you
will learn how to set up the TRAKTOR AUDIO 2 as your computer's default audio output de-
vice. For information on using the TRAKTOR AUDIO 2 as your music software's audio output
device, see section ↑6.7, Using TRAKTOR AUDIO 2 as Audio Output Device with Your Music
Software.
Before selecting the TA2 as your computer's default audio output device here are some points
to be aware of:
The TA2—in combination with a power amplifier, speakers, or headphones—can produce
sounds in decibel ranges that may cause hearing damage. Make sure the volume on your
amplifier is turned down before you begin playing music. Then, gradually increase the vol-
ume to the desired level. Similarly, keep your headphones off until the volume is set cor-
rectly.
• When using TRAKTOR on a Windows system, make sure that you have installed the TA2
hardware driver with the latest TRAKTOR software, or you download and install the TA2
hardware driver as described in the following section ↑6.1, Driver Software Installation on
Windows, before you connect the TA2 to your computer.
• The TA2 may not work properly connected to a USB hub. Connect it directly to a USB
port on your computer.
• It is recommended to connect computer speakers to the MAIN output and headphones to
the Headphones output sockets of TA2 since the TA2 Headphone output will automatical-
ly monitor the Main signal by default.
Using TRAKTOR AUDIO 2 as Your Computer's Default Audio Output Device
TRAKTOR AUDIO 2 - Manual - 45