User Manual

If you cannot find the Control Panel, the software is most likely not installed. In this case,
please reinstall/install TRAKTOR or the driver software as described in section ↑6.1, Driver
Software Installation on Windows.
On the left-hand side of the Control Panel, you find two tabs: Audio Settings, and Diagnostics:
►
Click on the tabs to open the corresponding page of the Control Panel.
Proceed to sections ↑7.1.1, Audio Settings Page and ↑7.1.2, Diagnostics Page for more infor-
mation on the Control Panel's pages.
7.1.1 Audio Settings Page
The Control Panel's Audio Settings page.
In the Audio Settings page, you can configure the audio latency and sample rate, and monitor
the device's status.
The Audio Settings page consists of two sections: Audio Processing and Device Monitor. See
the following subsections for further information.
Advanced Configuration of Your TRAKTOR AUDIO 2
Advanced Configuration on Windows (Control Panel)
TRAKTOR AUDIO 2 - Manual - 54