User guide


Page 15



7. SPECIFICATIONS
Note: Specifications are subject to change without notice.
Specification
Nature Power 3000W Pure Sine
Inverter-Charger
Inverter
AC Output Power
3000W
AC Output Current
25A
AC Surge Power (Peak)
6000W (5 seconds)
AC Output Voltage/Frequency
120 VAC / 60 Hz
AC Output Waveform
True Sinewave (<5% THD)
Nominal DC Input Voltage
12.5 VDC
No Load battery draw
< 3.5 A nominal, <1A with load sense
DC Input Voltage Operating Range
11.0 - 16.0 VDC
Under Voltage Alarm
11.8 VDC
Under Voltage Alarm Recovery
12.2 VDC
Under Voltage Shutdown
10.5 VDC
Under Voltage Recovery
11.5 VDC
Over Voltage Shutdown
16.5 VDC
AC Transfer Switch
Transfer Time
< 20 ms
Transfer Relay Rating
30A
AC Input Source Current Setting (SCR set)
15, 20, 25A, 30A
AC Input L1, N1
30A
AC Output Line 1 (L1, N1) and Line 2 ( L2, N2)
30A
Remote Display
Display Panel Port
RJ45 socket
LCD Display
AC Input / Output Voltage & Current
DC Input / Output Voltage & Current
Battery Temperature Sensor Port
BTS Port
RJ45 socket
Charger
Charging Voltage Range
7 – 16 VDC
Floated Voltage Range
13.45 – 13.8 VDC
Charging Control
3 Stages (Bulk/Absorption/Float)
Charger Current (max)
150A
Charger Current Setting
60A – 150A
Equalization Voltage (Flooded battery setting)
16.0 VDC
Equalization Current (Flooded battery setting)
½ Bulk Current (min 30A, max 75A)
Efficiency
>80%
Safety and Environmental
Conformance
Conforms to UL 458
Certified to CSA C22.2 no. 107.1
Agency Markings
cETLus
Operating Temperature
0°C to 40°C (32°F to 104°F)
Storage Temperature
-20°C to 60°C (-4°F to 140°F)
Relative Humidity
5-90% noncondensing
Operating Altitude
Up to 9,843ft (3000m) above sea level
Weights and Dimensions
Weights
66 lb (30 kg)
Dimensions
15.4 x 13.4 x 7.8” (392x340x197mm)