Nature's Generator User Manual
Nature's Generator The Nature’s Smartest, Infinitely Expandable Generator System Contents Important Safety Instructions Warning Caution 1 1 2 Introduction Unpack Your Nature's Generator Get to Know Your Nature's Generator 3 3 4 Using Your Nature's Generator How to Recharge Your Nature's Generator How to Use Your Nature's Generator How to Read the LCD Display How to Use Your Nature's Generator Smart Key How to Expand the Capacity of Your Nature's Generator How to Maintain and Store Your Nature's Generat
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Take care of all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Do not block any ventilation openings. 7. Do not use near flammable gases or fumes or other apparatus that produce a large amount of heat. 8. Only use attachments/accessories specified by the manufacturer. 9. Use only with the cart specified by the manufacturer, or sold with the apparatus.
Safety check After completing any service or repair to this device, ask the service technician to perform routine safety checks to determine that your Nature's Generator is in correct operating condition. Servicing These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
Introduction Congratulations on your new Nature's Generator, a state-of-art generator that provides reliable power for emergencies, off grid living, or wherever power is needed. With Nature's Generator app NaturesPulse, you can proactively diagnose the system, track the usage and communicate the issues. Unpack Your Nature’s Generator 1. Nature's Generator 2. AC Power Cord (In the storage compartment) 3. Nature's Generator Smart Key 4. This user guide Visit Naturesgenerator.
Get to Know Your Nature’s Generator Front Panel AC Input: To connect the wall outlet using the included power cord or any household power extension cord. Solar Input: To connect with solar panel(s). This Anderson port is designed to be used with up to 200 watts of solar power. LCD Display: LCD display shows the information of the system. LCD Display Button: Press it to light up LCD display for 30 seconds. Main Power Switch: Turn on or off the main power of your Nature's Generator.
Back Panel Storage: For storing the power cord. Expansion cord: Daisy chaining fuses and Daisy chain connector. Visit Naturesgenerator.
Using Your Nature’s Generator How to Recharge Your Nature’s Generator Recharging from Solar 1. Place your solar panel where it will get as much direct sunlight as possible. While direct sunlight in always preferred, solar panels should be connected at all times to provide a consistent trickle charge to your battery. Solar panels will also send a charge to your unit while in hazy or overcast skies. 2. Insert solar panel plug into Solar Input port on the front of Nature's Generator.
How to Use Your Nature’s Generator 1. Press the Main Power Switch to turn on your Nature's Generator. USB port will be on automatically when Main Power Switch is on. 2. Press the AC Outlet Switch to turn on the AC outlets. When not using AC outlets, make sure to turn off AC outlet switch to conserve power. 3. You’ll know the port is turned on when the icon is illuminated on LCD display. 4. Plug in any of your device for power. Uninterrupted Power Supply (UPS) Mode 1.
How to Read the LCD Display Battery Bar: 5 segment battery bar indicates charge in 20% increments. Once your Nature’s Generator is fully recharged, all battery segments will remain solid. Wind Turbine Icon: Indicates that your Nature’s Generator is being recharged by wind turbine. Bluetooth Icon: Indicates that your Nature’s Generator is connected with your smart phone by the Nature’s Generator Smart Key. AC Outlet Icon: Indicates when the AC outlet switch is turned on.
How to Use Your Nature’s Generator Smart Key 1. Turn on the main power of your Nature's Generator. 2. Plug your Nature's Generator Smart Key to the top USB port with Bluetooth icon on its right side. 3. If you have not already done so, click App Store on your iPhone or Play Store on your Android Phone. 4. Search “NaturesPulse” app and install it. 5. After the app is installed, please follow the instructions on the app to register your account before you can log into the home page. 6.
Troubleshooting My Nature’s Generator won’t charge when I connect my solar panel to it. Please follow these steps. 1. Make sure the solar panel is pointed directly toward the sun. It is preferred to position the solar panel face the south. The solar panel may produce little or no power if it is positioned in shade. 2. Check the cable connection on Nature's Generator and make sure it fits tightly. 3. If the LCD lights up, but the battery bar is not running.
Technical Specifications Battery: Type: AGM Sealed Lead Acid Capacity: 60Ah (720Wh) Self-discharge: Recommend to recharge every 4 months Inverter: Output Power: 1800watt max Output wave form: pure sine wave Output voltage: 120V Output frequency: 60Hz Ports: USB Port: 5V, up to 3A (15W) 12V DC Port: up to 20A (240W max) Expansion Port: 200A fuse Charges: AC Charger: 90W AC Charger Indicator: red (charging) and green (charged) Solar Charger: 200watt Wind Charger: 300watt General: Dimensions: 18 x 12 x 15 in (4
Limited Warranty One Year Limited Warranty Huntkey USA Inc. warrants to you, the original purchaser of this new product, that the product shall be free of defects in the original manufacture of the material or workmanship for a period of one (1) year from the original date of your purchase of the product (“Warranty Period”). This product must be purchased from an authorized dealer and packaged with this warranty statement. This warranty does not cover refurbished product.
What does the Warranty not Cover? This warranty does not cover: • Cosmetic damage • Damage due to acts of God, such as lightning strikes • Accident • Misuse • Abuse • Negligence • Commercial use • Modification of any part of the product • Damage due to incorrect operation or maintenance • Connection to an incorrect voltage supply • Attempted repair by anyone other than a facility authorized by Huntkey USA Inc.
V1.
Nature's Power Pod User Manual
Nature's Power Pod Contents Important Safety Instructions Warning Caution 1 1 2 Introduction Unpack Your Nature's Power Pod Get to Know Your Nature's Power Pod 3 3 4 Using Your Nature's Power Pod How to Recharge Your Nature's Power Pod How to Install Your Nature's Power Pod on Top of Nature’s Generator How to Connect Your Nature's Power Pod to Nature’s Generator How to Maintain and Store Your Nature's Power Pod 6 Troubleshooting 15 Technical Specifications 16 Limited Warranty 17 6 7 14 14
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Take note of all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Do not block any ventilation openings. 7. Do not use near flammable gases or fumes or other apparatus that produce a large amount of heat. 8. Only use attachments/accessories specified by the manufacturer. 9. Use only with the cart specified by the manufacturer, or sold with the apparatus.
Caution Damage requiring service Stop using the Nature's Power Pod and refer servicing to qualified service personnel under the following conditions: • If liquid has been spilled or objects have fallen into your Nature's Power Pod. • If your Nature's Power Pod has been exposed to rain or water. • If your Nature's Power Pod has been dropped or damaged in any way. • When your Nature's Power Pod exhibits a distinct change in performance. Cold weather Cold temperatures can impact Nature's Power Pod performance.
Introduction Congratulations on your new Nature's Power Pod, a great expansion to your Nature’s Generator. Unpack Your Nature’s Power Pod 1. Nature's Power Pod 2. Accessory Box 3. This user guide Visit Naturesgenerator.
Get to Know Your Nature’s Power Pod Front Panel LED Light Button: Press it to show the battery charge level. LED Lights: Each light indicates charge in 20% increments. Once your Nature's Power Pod is fully recharged, all LED lights will remain solid. 12V Port: 12V DC port is designed to provide up to 240 watts of power. Solar Input: To connect with solar panel(s). This Anderson port is designed to be used with up to 200 watts of solar power. Back Panel Expansion: Daisy chain connector.
Top Compartment Expansion cord: 35 inch long expansion cord. Visit Naturesgenerator.
Using Your Nature’s Power Pod How to Recharge Your Nature’s Power Pod Recharging from Solar 1. Place your solar panel where it will get as much direct sunlight as possible. While direct sunlight is always preferred, solar panels should be connected at all times to provide a consistent trickle charge to your battery. Solar panels will also send a charge your unit while in hazy or overcast skies. 2. Insert solar panel plug into Solar Input port on the front of Nature's Power Pod.
How to Install Your Nature’s Power Pod on Top of Nature’s Generator What is in the accessory box 1. Brackets 2. Bolts and nuts A: 16mm x 2pcs B: 25mm x 2pcs 3. Pod bar 4. Tools Visit Naturesgenerator.
Installing Procedures Step 1: Lift Nature's Power Pod and set it on top of Nature’s Generator. Make sure the feet of Nature's Power Pod sit between the handle and top case of Nature’s Generator. Visit Naturesgenerator.
Step 2: Remove two bolts from Nature's Power Pod with included Allen wrench. Put these two bolts aside for now as they will be reused in step 5. Visit Naturesgenerator.
Step 3: Put the brackets on the cart. Bracket will match up with the shape of the cart frame. Visit Naturesgenerator.
Step 4: Use type A bolts and nuts to secure the two brackets. Use wrench to hold the nuts and Allen wrench to tighten the bolts. A A Visit Naturesgenerator.
Step 5: Place pod bar on the top of Nature's Power Pod. Insert the bolts that were removed in step 2 by Allen wrench. Visit Naturesgenerator.
Step 6: Use type B bolts and nuts to secure the brackets and pod bar. Use the wrench to hold the nuts and Allen wrench to tighten the bolts. B Visit Naturesgenerator.
How to Connect Your Nature’s Power Pod to Nature’s Generator You can connect your Nature's Power Pod to your Nature’s Generator to extend the overall run time. 1. Open the top cover of the Nature's Power Pod, locate the expansion cable, and run the expansion cable out of Nature's Power Pod through the opening on the back of the Nature's Power Pod. 2. Locate Expansion Port on the back of your Nature’s Generator and open the rubber cover. 3. Connect the expansion cable to the expansion port. 4.
Troubleshooting My Nature’s Power Pod won’t charge when I connect my solar panel to it. Please follow these steps. 1. Make sure the solar panel is pointed directly toward the sun. It is preferred to position the solar panel face the south. The solar panel may produce little or no power if it is positioned in shade. 2. Check the cable connection on Nature's Power Pod and make sure it fits tightly. 3. If the LED lights up, but the battery bar is not running.
Technical Specifications Battery: Type: AGM Sealed Lead Acid Capacity: 100Ah (1200Wh) Self-discharge: Recommend to recharge it every 4 months Ports: 12V DC Port: up to 20A (240W max) Expansion Cord: 45 inches Charges: Solar Charger: 200watt Battery Level LED lights: 5 LED lights General: Dimensions: 18 x 12 x 15 in (47 x 30 x 38 cm) Operating temperature: 32-104 °F (0-40 °C) Storage Temperature: 23–111 °F (-5–45 °C) Weight: 92 lbs Visit Naturesgenerator.
Limited Warranty One Year Limited Warranty Huntkey USA Inc. warrants to you, the original purchaser of this new product, that the product shall be free of defects in the original manufacture of the material or workmanship for a period of one (1) year from the original date of your purchase of the product (“Warranty Period”). This product must be purchased from an authorized dealer and packaged with this warranty statement. This warranty does not cover refurbished product.
What does the Warranty not Cover? This warranty does not cover: • Cosmetic damage • Damage due to acts of God, such as lightning strikes • Accident • Misuse • Abuse • Negligence • Commercial use • Modification of any part of the product • Damage due to incorrect operation or maintenance • Connection to an incorrect voltage supply • Attempted repair by anyone other than a facility authorized by Huntkey USA Inc.
V1.
NATURE’S GENERATOR POWER PANEL Huntkey USA, Inc support@naturesgenerator.com 805.383.0003 805.383.0005 How to Position the Solar Panel Flat Position Winter Position How to Use the Solar Panel Optional: To Double Charging Speed, Use the Parallel Connection Method Summer Position Connect the solar panel cable to the solar input port. You can use the four eyebolts to anchor the solar panel to the ground.
Nature's Wind Turbine User Manual
Nature's Wind Turbine Contents Welcome Important Safety Instructions Warning Caution 1 1 2 Introduction Unpack Your Nature's Wind Turbine Get to Know Your Nature's Wind Turbine 3 3 4 Using Your Nature's Wind Turbine How to Choose the Location How to Choose the Tower How to Install your Nature’s Wind Turbine How to Connect your Nature's Wind Turbine to your Nature’s Generator 7 7 8 8 12 Maintenance 14 Troubleshooting 14 Technical Specifications 15 Limited Warranty 16 1
Welcome Congratulations on the purchase of your new Nature’s Wind Turbine, a state-of-art wind turbine that recharges your Nature’s Generator through the wind. Please read these instructions thoroughly prior to installation, then store this manual in a safe place for future reference. If at any time you are unclear about this product, or require additional assistance, please do not hesitate to contact our Customer Support line at 805-383-0003 or email us at support@naturesgenerator.com .
Safety check After completing any service or repair to this device, ask the service technician to perform routine safety checks to determine that your Nature's Wind Turbine is in correct operating condition. Servicing These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
Unpack Your Nature’s Wind Turbine 1. Nature’s Wind Turbine main body 2. Hub 3. Nose cone 4. Blades x 5 5. 100-foot-long wind turbine cable Visit NaturesGenerator.
6. Controller box 7. This user manual 8. Accessory bag that includes. M6 bolt x 12 (2 spare pieces) M6 nut x 12 (2 spare pieces) M6 flat washer x 12 (2 spare pieces) M6 lock washer x 12 (2 spare pieces) M16 lock nut x 1 M16 lock washer x 1 Rubber pad x 1 Hex key 8mm Hex key 6mm Hex key 5mm Ground line Visit NaturesGenerator.
Get to Know Your Nature’s Wind Turbine Blade x 5 Hub Nose Cone M16 lock washer Main Body M6 flat washer x 10 M16 nut M6 lock washer x 10 M6 Bolt x 10 M6 Nut x 10 M8 Bolt x 4 M8 Nut x 4 Rubber Pad x 1 Controller box Pipe (not included) 100-foot-long wind turbine cable Nature’s Generator (not included) Complete Electrical System Your Nature’s Wind Turbine comes with 100 foot long wind turbine cable and controller box. It is a complete electrical system to recharge your Nature’s Generator.
Grounding Every wind turbine and turbine tower need to be grounded at the tower base. Grounding the tower at its base may help prevent shocks to persons touching the tower due to lightning or electrical faults. Please take the time to review the National Electrical Code (NEC) and local building and zoning regulations for complete requirements. Your Nature’s Wind Turbine has a grounding cable included for this purpose.
Using Your Nature’s Wind Turbine How to choose the location The wind speed has dramatic effects on your Nature’s Wind Turbine. The location shall be carefully considered to achieve the optimal performance of your Nature’s Wind Turbine, prior to the mounting of your Nature’s Wind Turbine. Each installation is unique and often a compromise among surrounding environment, distance between your Nature’s Wind Turbine and your Nature’s Generator, zoning requirements, budget and etc.
How to choose the tower Your Nature’s Generator is designed to mount on nominal 1.5 inch schedule 40 steel tubing or piping. The outside diameter of the tubing or piping shall be around 1.875 inch to 1.900 inch. The steel tubing or piping should be available through your local hardware store. Under no circumstances should plastic pipe be used to construct a tower. Towers must be capable of withstanding 160 pounds of load in the horizontal direction at the wind turbine.
Step 3: The rubber gasket that is stored inside of the yaw and the included rubber pad help to prevent the the yaw from contacting the pipe directly. The rubber gasket and rubber pad will assist in reducing the transmission of noise and vibration down the pipe. Slide the yaw shaft all the way down over the top of the pipe and be careful not to pinch the cable. There may be some slight variances of the thickness or size of the pipe from different makers or models.
Step 5: Place one of the blades on one of the hub socket. Place a lock washer and then a flat washer on the blot and then insert the bolt through the blade ad the socket. Place a nut on the other side of socket and tighten the bolt with the 5mm hex key. Repeat this process on all five blades. Make sure the lock washer and flat washer are placed in the right order. The blades will become loose if it is not installed properly.
Step 7: Insert the 8mm hex key into the rotor shaft. Hold the blade assembly and tighten the M16 nut by turning the 8mm hex key counter clockwise. If needed, please use the extender (not included) to extend 8mm hex key to tighten the lock nut. Finally, spin the blades slowly to be sure they turn freely and the hub does move in along the rotor shaft. Step 8: Place the nose cone over the center line of the blade assembly and snap the nose cone into place.
How to connect your Nature’s Wind Turbine to your Nature’s Generator Step 1: Connect the wind turbine cable to the round connector from one side of the controller box by pushing and twisting the connectors Step 2: Connector the square connector from the other side of controller box to your Nature’s Generator “WIND INPUT” port. Visit NaturesGenerator.
Step 3: When your Nature's Wind Turbine spins at certain speed, you will see the whole display on your Nature's Generator lights up, if your Nature's Generator main power is switched off. It means your Nature's Wind Turbine is recognized by your Nature's Generator, but it is not powerful yet to recharge your Nature's Generator. When your Nature's Wind Turbine spins at proper speed, you will see the wind turbine icon on the display illuminates and battery bar starts running.
MAINTENANCE Your Nature’s Wind Turbine has been designed to run for long periods without requiring any maintenance. Performance will be enhanced if you periodically inspect your system. Review the following simple maintenance procedures and implement every six months. Caution: Do not go near the wind turbine during operation. • Check blades for superficial damage. Replace blades if damaged.
Technical Specifications Material: Wind turbine blades: fiberglass nylon composite Wind turbine body: cast aluminum alloy with powder coating Wind turbine cable: 12AWG pure copper cable Connectors: Wind turbine cable connectors: weatherproof M19 3P connectors. Wind input connectors: Anderson connectors. Yaw: fits 1.
Limited Warranty One Year Limited Warranty HuntKey USA Inc. warrants to you, the original purchaser of this new product, that the product shall be free of defects in the original manufacture of the material or workmanship for a period of one (1) year from the original date of your purchase of the product (“Warranty Period”). This product must be purchased from an authorized dealer and packaged with this warranty statement. This warranty does not cover refurbished product.
What does the Warranty not Cover? This warranty does not cover: • Cosmetic damage • Damage due to acts of God, such as lightning strikes • Accident • Misuse • Abuse • Negligence • Commercial use • Modification of any part of the product • Damage due to incorrect operation or maintenance • Connection to an incorrect voltage supply • Attempted repair by anyone other than a facility authorized by Huntkey USA Inc.
V1.
