Full Product Manual
How to Connect Your Nature’s Power Pod to Nature’s Generator
You can connect your Nature's Power Pod to your Nature’s Generator to extend the overall run
me.
1. Open the top cover of the Nature's Power Pod, locate the expansion cable, and run the expansion
cable out of Nature's Power Pod through the opening on the back of the Nature's Power Pod.
2. Locate Expansion Port on the back of your Nature’s Generator and open the rubber cover.
3. Connect the expansion cable to the expansion port.
4. The Expansion (Chain Link) Icon will be illuminated on the display of Nature’s Generator to
indicate it is connected.
You will experience an increased run me of approximately 167% by adding one Nature's Power
Pod, approximately 333% by adding two Nature's Power Pods and 500% by adding three Nature's
Power Pods.
How to Maintain and Store Your Nature’s Power Pod
Please recharge your Nature's Power Pod once every four months and store in a venlated, cool
and dry locaon. If possible, please connect your Nature's Power Pod to the solar panel while in
storage to top off the baery voltage. This keeps baery healthy and prolongs its life. Failure to
maintain Nature's Power Pod by these steps can result in baery damage which will void the
product warranty.
Please clean your Nature's Power Pod with a so, lint-free cloth. If your Nature's Power Pod is
especially dirty, moisten a so, lint-free cloth in a weak detergent soluon, squeeze the excess
moisture from the cloth, then wipe the cabinet with the cloth. Use a clean cloth to dry your
Nature's Power Pod.
14
Visit Naturesgenerator.com for More Information