Full Product Manual

8
How to choose the tower
Your Nature’s Generator is designed to mount on nominal 1.5 inch schedule 40 steel tubing or piping.
The outside diameter of the tubing or piping shall be around 1.875 inch to 1.900 inch. The steel
tubing or piping should be available through your local hardware store. Under no circumstances
should plasc pipe be used to construct a tower. Towers must be capable of withstanding 160
pounds of load in the horizontal direcon at the wind turbine.
Visit NaturesGenerator.com for More Information
Cauon: Choose a calm day and have someone available to help during the installaon process.
Cauon: The blades edges are sharp. Please handle carefully.
Cauon: Do not assemble the blades before the body is mounted on the pipe or tower.
Cauon: Do not connect your Nature’s Wind Turbine with Nature’s Generator unl all installaon
has been completed.
How to Install your Nature’s Wind Turbine
Step 1: Run the wind turbine cable through the pipe and drag the connector close to the Nature’s
Generator. The female connector shall be close to your Nature's Wind Turbine and the male connector
shall be close to your Nature's Generator.
Step 2: Connect the wind turbine cable and your Nature's Wind Turbine by pushing and twisng the
connectors.
Female
Connector
Male
Connector