Full Product Manual
11
Visit NaturesGenerator.com for More Information
Step 7: Insert the 8mm hex key into the rotor sha. Hold the blade assembly and ghten the M16 nut
by turning the 8mm hex key counter clockwise. If needed, please use the extender (not included) to
extend 8mm hex key to ghten the lock nut. Finally, spin the blades slowly to be sure they turn freely
and the hub does move in along the rotor sha.
Step 8: Place the nose cone over the center line of the blade assembly and snap the nose cone
into place.
Step 9: Carefully raise the tower and secure the base and/or cables.
Nose cone