Manualshelf

Full Product Manual

ManualsBrandsNATURE'S GENERATOR ManualsGenerators1800-Watt Solar Powered Electric Start Portable Generator with Supplemental Power Pod and Wind Turbine
12345678910
How to Recharge Your Nature’s Generator
Recharging from Solar
1. Place your solar panel where it will get as much direct sunlight as possible. While direct sunlight
in always preferred, solar panels should be connected at all mes to provide a consistent trickle
charge to your baery. Solar panels will also send a charge to your unit while in hazy or overcast
skies.
2. Insert solar panel plug into Solar Input port on the front of Nature's Generator. You will know
it is recharging when LCD display lights up, solar panel icon is illuminated and baery bar starts
running. The baery bar stops running when the baery is full or there is not enough power
from solar panel.
3. It takes about 10 to 15 hours to recharge Nature's Generator if using 100 wa solar panel,
depending on the strength of the sunlight.
4. To increase the recharging speed, you can chain mulple solar panel in parallel connecon.
The Solar Input port can handle up to 200 wa solar panel. Visit Naturesgenerator.com for
informaon on purchasing addional solar panels.
Recharging from Wind
1. Place your wind turbine where it will get as much wind as possible.
2. Insert wind turbine plug into wind Input port on the front of Nature's Generator. You will know
it is recharging when LCD display lights up, wind turbine icon is illuminated and baery bar starts
running. The baery bar stops running when the baery is full or there is not enough power
from wind turbine.
3. The recharging speed depends on wind turbine power rang and the strength of the wind. The
wind input port can handle up to 300 wa wind turbine. Visit Naturesgenerator.com for more
informaon about wind turbine.
Recharging from AC Power
1. Locate the power cord in the storage compartment on the back of the Nature's Generator.
2. Insert the power cord to the AC Input Port of the Nature's Generator.
3. Plug the other end of power cord to the wall outlet. You will know it is recharging when LCD
display lights up, AC input icon is illuminated and baery bar starts running. The baery bar stops
running when the baery is full.
Recharging from the Car
You can use DC extension cord (not included in the box) to recharge the Nature's Generator by
using 12C DC port. This method is not recommended because it recharges much slower and the
LCD display doesn’t light up.
Using Your Nature’s Generator
6
Visit Naturesgenerator.com for More Information