User's Manual

CHANGING THE GAME IN HEALTH AND FITNESS
™
8
If you have an EV916 manufactured PRIOR to September 30, 2005, please follow steps
17-22 (for units manufactured AFTER September 30, 2005, please skip to step 19).
To determine the manufacturing date of your machine, refer to the 14-digit serial number:
08000050926005
1st 5 digits: Model Number (above example: Model #08000)
Next 6 digits: Year, Month, Day (above example, “050926) means September 26, 2005)
Last 3 digits: Number of units built this day (above example, 005 means this was the fi fth unit built on
September 26, 2005)
17. Remove the rubber grommets from the openings in
the left Swing Arm and left Foot Support Tube. Slide
the Grommets onto the Footlink Cable extruding from
the Foot support Tube.
18. Using a 1 1/2” section of sheathed housing, make
a loop in the sheathed portion of the footlink cable
between the grommets and the end connector, and
use a zip tie to secure the loop. See Figure 4.
19. Connect the swing arm cable to the footlink cable.
You can remove the warning tag at this time.
Figure 4
CommElliptical_AM_0805.indd 8 9/27/2005 10:26:50 AM