User's Manual

CHANGING THE GAME IN HEALTH AND FITNESS

™

9. Rotate the elliptical mast into the proper position, taking care not to pinch the electrical cable at the bottom

in the process (see Figure 1).

10. Connect the electrical cables coming out of the front bottom ﬂ ange of the mast assembly to the electrical

cables coming out of the front ﬂ ange of the main frame center tube (see Figure 1). The color-coded cables

snap together with basic male/female connectors for corresponding cable colors.

11. Install and tighten (4) 3/8”-16 hex head screws, (4) 3/8” ﬂ at washers, and (4) 3/8” lock washers into front

bottom ﬂ ange of the upright and the front ﬂ ange of the main frame tube. Take care not to pinch the electrical

cable during this process. This requires a 9/16” hex socket wrench.

12. Install the front left and right covers and align the holes at the side. (See Figure 1).

13. Secure the front bottom left and right covers with (10) #10-32 Phillips head screws. This will require a #2

Phillips head screw driver.

Figure 1

Electrical Cable

Take care not to pinch when assembling.

Connect before securing ﬂ anges together.

• 3/8”-16 Hex Head Screw

• 3/8” Lock washer

• 3/8” Flat Washer

Front Right Cover

Front Left Cover

#10-32 Phillips Head Screws

CommElliptical_AM_0805.indd 6 9/27/2005 10:26:49 AM