Operation Manual

DO NOT CUT the Shipping Strap on the Base Assembly until it has been placed face up as

shown in the appropriate work space ( * ).

ASSEMBLY

1. Fold the Walking Deck on the Base Assembly

Once the Base Assembly has been properly placed in the workout area, cut the Shipping Strap. Press and hold the plastic

deckreleasehandle(5a)undertheendoftherightsiderail.Usingthesupportbar(5b)foundbelowtherearofthewalk-

ingbelt,liftthewalkingdeckandcontinuetoholdthedeckhandlefortherstpartofthefoldprocess(0-15degrees).

Release the deck handle and lift the walking deck fully upward to engage the hydraulic lift. Be sure that the hydraulic lift is

correctly locked in place.

Use proper safety precautions and lifting techniques. Bend your knees and elbows, keep your back straight

and pull up equally with both arms. Make sure that your own physical strength is capable of lifting the

walking deck until it engages the locking mechanism. Use a second person if necessary.

Do not use the walking belt or rear roller to lift the treadmill. These parts do not lock in place and can

abruptly move. Injury to you or damage to the machine can occur.

Make sure that the locking mechanism is engaged. Carefully pull back on the Walking Deck and make sure that it does

not move. When you do this, keep clear of movement path in case the treadmill lock is not engaged.

Do not lean against the treadmill when it is folded. Do not put items on it that could cause it to become

unstable or fall.

15°