Operation Manual
38
Thedefaultis“VALUE-ON”forallworkoutvalues.When done with modifying which workout values are displayed,
push the OK button to set the Console.
10. The Console display shows the WIRELESS HR prompt. If you are using the Console speakers at their higher settings
and / or using a larger sized personal electronic device, the Console may show Heart Rate interference. This option
allows the Telemetry Heart Rate Receiver to be deactivated blocking the interference.
Thedisplayshowsthecurrentvaluesetting:“ON”or“OFF”.PushtheIncrease()orDecrease()buttonstochange
the value. The default is “ON”.
Push the OK button to set the Telemetry Heart Rate Receiver to active.
11. TheConsolewillgotothePower-UpModescreenwiththeuserselected.
Reset a User Profile
1. FromthePower-UpModescreen,pushtheUserbuttontoselectoneoftheUserProles.
2. Push the OK button to select the User Profile.
3. The Console display shows the GOAL TRACK prompt. Push the Decrease () button to change the prompt.
Note: ToexittheUserProleoptions,pushthePAUSE/STOPbuttonandtheconsolewillgobacktothePower-Up
Mode screen.
4. The Console display shows the RESET prompt and the current User Profile name. Push OK to start the Reset User
Proleoption.
5. TheConsolewillnowconfirmtherequesttoresettheUserprofile(thedefaultselectionis‘RESET-NO’).Pushthe
Increase()orDecrease()buttonstoadjusttheselection.
6. Push OK to make your selection.
7. TheConsolewillgotothePower-UpModescreen.
Changing Incline Levels
Push the Incline Level Increase()orDecrease()buttonstochangetheinclineangle
of the Deck at any time with the Safety Key installed. To rapidly change the incline level
pushthedesiredPre-SetInclineButton,andthentheInclineEnterButton.TheDeckwill
adjust to the selected incline level.
Note:AfteraPre-SetInclineButtonispushed,theInclineEnterButtonmustbe
pushed within 12 seconds.
Be sure the area below the machine is clear before lowering the Deck. Fully
lower the Deck after each workout.
Exercise on this machine requires coordination and balance. Be sure to
anticipate that changes in belt speed and incline angle of deck can occur
during workouts, and be attentive in order to avoid loss of balance and
possible injury.
Be sure that the workout space you are utilizing has adequate height clearance, taking
intoconsiderationtheheightoftheuserandthemaximumheightofthefullyinclinedDeck.
Changing Speed Levels
Push the Speed Level Increase()orDecrease()buttonstochangetheBeltSpeedatanytimeinaworkoutprogram.
TorapidlychangetheSpeedlevelpushthedesiredPre-SetSpeedButton,andthentheSpeedEnterButton.TheWalking
Belt will adjust to the desired speed.
Note:AfteraPre-SetSpeedButtonispushed,theSpeedEnterButtonmustbepushedwithin12seconds.
Pre-SetIncline
Buttons
Incline
Enter
Button