Operation Manual

41
2. PushtheUserbuttontoselectthedesiredUserprole.
3. Push the Programs buttons to select a Category of Workout.
4. Push the Increase()orDecrease()buttonstoselect a Profile Workout, and push OK.
 IftheselectedWorkoutisHeartRateTarget,theConsolewillrequestthedesiredBeatsPerMinute(BPM)forthe
Workout. Use the Increase()orDecrease()buttonstoadjust, and push OK.
IftheselectedWorkoutProgramhasInclineand/orSpeedProlecustomization,theConsolewillprompt,“EDIT
INCLINE” screen. Push the Increase()orDecrease()buttonstochangethecurrentsetting,andpushtheLeft()or
Right()buttonstoshifttheactiveProfilesegment.PushOKtoaccepttheInclineProle.
Note: The “EDIT SPEED” screen operates the same way.
5. Use the Increase()orDecrease()buttons to adjust the Minimum Speed of the Belt, and push OK. The Profile
Program will adjust so the Minimum Speed value is the lowest Speed of the Profile Program when accepted.
6. Use the Increase()orDecrease()buttonstoadjusttheMaximumSpeedoftheBelt,andpushOK.TheProfile
ProgramwilladjustsotheMaximumSpeedvalueisthehighestSpeedoftheProfileProgramwhenaccepted.
During a Workout, the User can directly adjust the speed of the belt above the Maximum Speed setting if
desired, by using the Increase() button.
7. Use the Increase()orDecrease()buttons to select a typeofGoal(Distance,TimeorCalories), and push OK.
8. Use the Increase()orDecrease()buttons to adjust the workout value, and push OK.
9. The Console will display the “READY ?” prompt.
10. PushSTARTtobeginthegoal-orientedworkout.Theworkoutwillbeginaftera three second, audible countdown.
Note: The Console will display “RAMPING UP” as the Walking Belt gets up to speed.
Heart Rate Control Workout Programs
The Heart Rate Control programs let you set a heart rate goal for your workout. The program monitors your heart rate in
beatsperminute(BPM)fromtheContactHeartRate(CHR)sensorsonthemachineorfromaHeartRateMonitor(HRM)
chest strap, and adjusts the incline during a workout to keep your heart rate in the selected zone.
Note: The console must be able to read the heart rate information from the CHR sensors or HRM for the Heart Rate
Control program to work correctly.
The Target Heart Rate programs use your age and other User information to set the Heart Rate Zone values for your
workout.Theconsoledisplaythengivespromptsforyoutosetupyourworkout:
1. Push the PROGRAMS button until the HEART HEALTH Category is selected.
2. Push the Increase()orDecrease()buttonstoselectthepercentageofmaximumheartrate:HEALTHY55%,FAT
BURN65%,AEROBIC75%,ANAEROBIC85%.
Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in
your chest, become short of breath, or feel faint. Contact your doctor before you use the machine again.
Use the values calculated or measured by the machine’s computer for reference purposes only. The heart
rate displayed on the console is an approximation and should be used for reference only.
3. Push the Increase()orDecrease()buttonstosettheMinimumSpeed,andpushOK.
4. Push the Increase()orDecrease()buttonstosettheMaximumSpeed,andpushOK.
5. Push the Increase()orDecrease()buttonstoselecttheGoaltype,andpushOK.
6. Push the Increase()orDecrease()buttonstosetthegoalvaluefortheworkout,andpushOK.
Note: Be sure to allow time for your heart rate to reach the desired heart rate zone when setting the goal. The Console
will display the heart rate value based on the current User settings.
7. Push START to begin the workout.