Operation Manual

ManualsBrandsNautilus ManualsExercise BikeT618

Condition/Problem Things to Check Solution

No display/partial display/

unit will not turn on

Checkelectrical(wall)

outlet

Make sure unit is plugged into a functioning wall outlet. Test the

outlet with a known functioning device such as a lamp.

Check connection at front

of unit

Connection should be secure and undamaged. Replace power

cord or connection at unit if either are damaged.

Check Power Switch Turn on the power with the Power Switch.

Check data cable integrity All wires in cable should be intact. If any are visibly crimped or

cut, replace cable.

Check data cable

connections/orientation

Be sure cable is connected securely and oriented properly.

Small latch on connector should line up and snap into place.

Check console display for

damage

Check for visual sign that console display is cracked or other-

wise damaged. Replace Console if damaged.

Console Display IfConsoleonlyhaspartialdisplayandallconnectionsarene,

replace the Console.

If the above steps do not resolve the problem, contact Cus-

tomer Care for further assistance.

Unit operates but Contact

HR not displayed

Sensor grip Be sure hands are centered on HR sensors. Hands must be

kept still with relatively equal pressure applied to each side.

Dry or calloused hands Sensorsmayhavedicultywithdriedoutorcallousedhands.

Aconductiveelectrodecream(heartratecream)canhelp

make better conduct. These are available on the web or at

medicalorsomelargertnessstores.

If tests reveal no other issues, contact Customer Care for fur-

ther assistance.

Unit operates but

Telemetric HR not

displayed

Chest Strap Strap should be “POLAR

” compatible and uncoded. Make

sure strap is directly against skin and contact area is wet. Make

sure the transmitter has the curve oriented upward.

Chest Strap Batteries If strap has replaceable batteries, install new batteries.

CheckUserProle SelecttheEditUserProleoptionfortheUserProle.Goto

the WIRELESS HR setting and make sure that the current

value is set to ON.

Interference Try moving unit away from sources of interference (TV, Micro-

wave,etc).

Replace Chest Strap If interference is eliminated and HR does not function, replace

strap.

Replace Console If HR still does not function, contact Customer Care for further

assistance.

Speed display is not

accurate

Display set to wrong unit

of measure. (English/

Metric)

Change display to show correct units.

Consoleshutso(enters

sleepmode)whileinuse