Operation Manual

8120 Installation and Operation Manual65
Press
SETUP
then select Alarms:
17-7 Setup > Logs
Press
SETUP
then select Logs:
The values can be reset independently of
each other. These log values are saved when
the unit is turned off.
Reset trip dist
This resets the trip distance to zero.
Reset total dist
This option resets the total distance to zero.
Reset engine hours
Use this option to reset the engine hours
to zero. This can be useful after an engine
service or to count the engine hours between
service intervals.
17-8 Setup > Alarms
For the XTE, Fish and Loss of DGPS
fix alarms, select to turn the alarm on or
select to turn the alarm off. For the other
alarms, enter a trigger value to turn the alarm
on. The alarm will sound each time the alarm
value passes the trigger value. For example,
the Danger alarm will sound if the boat
comes closer to a danger waypoint than the
trigger value and the Anchor alarm will
sound if the boat moves by more than the
trigger value. To turn these alarms off, enter a
trigger value of 0 (zero).
You can display the alarm status in the data
header (see section 2-7-3). The alarm status
shows the symbol for each alarm that is on.
The symbol is normally black and turns red if
the alarm triggers.